Prepare for Halloween with APC’s Spooktacular Fun DIY Glow In The Dark Bath Bombs!
You Will Need:
- 2 cups of Sodium Hydrogen Carbonate
- 1 cup of Citric Acid
- 3 tsp of Epsom Salts (Magnesium Sulphate Heptahydrate 99.5%)
- 6ml of Lime Essential Oil
- Orange glow pigment powder
- 4 drops of Witch Hazel
- Bath Bomb Mould
Mix in the Epsom Salts.
Add 6ml of Lime Essential Oil. Work the fragrance through the powder mixture. Try and avoid as many clumps as possible.
Add the Orange glow pigment powder.
Split the mixture in half. *Top Tip: Make sure the bowls you have chosen have enough room to mix by hand*
Add 4 drops of witch hazel. Rub the witch hazel through the powder. Squeeze the powder in your hand to see if it holds its shape. If it does not, add another drop of witch hazel and repeat until it does. *Please note – avoid adding too much witch hazel as it will set the bath bomb into a bubbling reaction*
Gently pack in the mixture and repeat until one half of the mould is full. Do the same thing to the other side of the mould.
Firmly press the two halves together while twisting. Make sure the interlocking seals are clear of any bath bomb mixture so they can click together. If they don’t push fully together, you can add another pinch of mix between the two halves. If your bath bomb mould is not clicking together, this may be if some mixture is stuck in between the mould.
Allow to dry for 24 hours.
Your Halloween Spooktacular Glow in the Dark Bath Bombs are now complete!
NOTE: BEFORE USING ANY OF THE PRODUCTS LISTED PLEASE READ ANY SAFETY AND PRECAUTIONS TO THIS PRODUCT BEFORE USAGE.
APC Pure does not accept any responsibility, this is a guide only.
THIS EXPERIMENT SHOULD BE DONE WITH ADULT SUPERVISION AT ALL TIMES.