Fully Valet Your Car in 10 Minutes

With just 10 minutes of your time, you can have your car looking brand new!

Important Note: Prior to using any of the products mentioned, it is highly recommended to thoroughly read and understand all safety precautions associated with each product. It is also strongly advised to perform a patch test before proceeding with usage.

Please be advised that this guide is intended for informational purposes only and APC Pure cannot accept any responsibility for the outcome of any usage based on this guide.

Here are the materials you'll need:

• 2 Buckets
• Sponge
• Gloves
• Towels
• Multi-Purpose Car Cleaner
• Alloy Wheel Cleaner
• Glass & Window Cleaner
• Isopropanol 90-91%
• Talcum Powder

Step 1: Fill two buckets with water: one for sudsing your cloth and the other for rinsing your cloth.

Step 2: Rinse the car with a hose and apply the Multi-Purpose Car Cleaner, rinsing the sponge frequently. Rinse the car again to remove any soap suds and proceed to clean using a soft towel. Instead of wiping, try blotting the water to dry your car effectively.

Step 3: Apply Alloy Wheel Cleaner Solution using a spray, mop, sponge, or brush. Allow it to soak for a few minutes, then clean one wheel at a time from top to bottom. Rinse and dry the wheels using a soft cloth.

Step 4: Spray the Glass and Window Cleaner onto a clean microfiber towel and wipe the inside and outside of the windows in a straight up and down motion.

Step 5: Thoroughly vacuum the interior of your car, including the mats. For a fresh scent and to eliminate odours, lightly dust Talcum Powder and leave it on for five minutes before vacuuming again.

Step 6: To clean the interior, including the dashboard and inside of the doors, use Isopropanol 90-91%. Apply it with a cloth and buff it in. Dry the surfaces with a clean cloth.