Motorhome Care

Follow these step-by-step instructions to ensure your motorhome stays clean and well-maintained all year round. Motorhome parked up next to the sea at sunset

Important Note: Prior to using any of the products mentioned, it is highly recommended to thoroughly read and understand all safety precautions associated with each product. It is also strongly advised to perform a patch test before proceeding with usage.

Please be advised that this guide is intended for informational purposes only and APC Pure cannot accept any responsibility for the outcome of any usage based on this guide.

Here are the materials you'll need:

Water
Multi-Purpose Cleaner
Bucket
Sponge
Glass & Window Cleaner
Microfibre Cloth
Alloy Wheel Cleaner Solution
Surgical Spirit
Sodium Hydrogen Carbonate
Sodium Hypochlorite 14%
Acetic Acid 6%

Exterior Cleaning

Step 1: Start by spraying the motorhome with a hosepipe or pouring warm water over it. Avoid the windows to prevent water from entering seals. Use a bucket, sponge, and Multi-Purpose Cleaner to clean the roof first, then work your way down the sides, front, and rear. Let the solution soak for 10 minutes, then rinse off. Use a clean, dry cloth to absorb excess water.

Step 2: Spray Glass & Window Cleaner onto a clean microfibre towel. Wipe the outside of the windows using up and down motions.

Step 3: Apply Alloy Wheel Cleaner Solution using a spray, mop, sponge, or brush. Allow it to soak for a few minutes. Clean one wheel at a time, starting from the top and working your way down. Rinse and dry the wheels with a soft cloth.

Interior Cleaning

Step 1: Spray Glass & Window Cleaner onto a clean microfibre towel. Wipe the inside of the windows using up and down motions.

Step 2: To clean sides and shelves, use Surgical Spirit and a cloth.

Step 3: To eliminate odours in carpets, sprinkle a small amount of Sodium Hydrogen Carbonate. Leave it for five minutes, then vacuum.

Step 4: Remove removable parts such as shelves and drawers from the fridge. Soak them in warm water with regular dishwashing soap. Wipe and rinse thoroughly using a microfibre cloth or sponge.

For stubborn stains, create a thick paste using a small amount of Sodium Hydrogen Carbonate mixed with water. Apply the paste to the stain, leave for an hour, and then wipe with a damp sponge or cloth. The Sodium Hydrogen Carbonate will help loosen the stain for easy removal.

Step 5: To clean bathroom surfaces, use Surgical Spirit and paper towel to dry.

Step 6: Dilute Sodium Hypochlorite 14% with water (1 part Sodium Hypochlorite 14% to 3 parts water) and use it to disinfect and clean sinks.

Step 7: To disinfect and sanitise the toilet, add a cup of Sodium Hydrogen Carbonate and let it soak for an hour. Then, pour a cup of Acetic Acid 6% and leave it for 5 minutes. Flush the toilet.