Spa Cleaning

Having a clean spa is not only essential but the perfect way to allow yourself to relax with no mess or worries. 

Important Note: Prior to using any of the products mentioned, it is highly recommended to thoroughly read and understand all safety precautions associated with each product. It is also strongly advised to perform a patch test before proceeding with usage.

Please be advised that this guide is intended for informational purposes only and APC Pure cannot accept any responsibility for the outcome of any usage based on this guide.

Here are the materials you'll need:

• Trigger Spray Attachment
• Surgical Spirit
• Glass and Window Cleaner
• Isopropanol 70%
• Acetic Acid 6%
• Sodium Hydrogen Carbonate (Sodium Bicarbonate)

Step 1: Using a trigger spray on the Surgical Spirit bottle. Spray evenly surfaces and use a cloth to clean and dry.

Step 2: Use the Glass and Window Cleaner on the windows and make sure to wipe straight away for a streak free finish.

Step 3: For the handrails and other metal parts use Isopropanol 70%. Dry with a cloth.

Step 4: For ensuring fresh smelling drains use Acetic Acid 6% and Sodium Hydrogen Carbonate (Sodium Bicarbonate). Pour a liberal amount of Sodium Hydrogen Carbonate (Sodium Bicarbonate). Then pour Acetic Acid 6% into the drain. The reaction between the chemicals will produce bubbles. Finish by pouring hot water. If the drain is more intense repeat again.

Step 5: To clean the Spa Pillows, read the instructions for the pillows you own to ensure you don’t shrink or ruin them.

Step 6: Make sure to replace your water every now and then to avoid the build up of soaps and detergents.

Step 7: To ensure the water and spa keeps clean over time, look into cleaning your filters to ensure maximum use.