Unclog Drains

Have a nasty, clogged drain? You can create your own solution using Magnesium Sulphate Heptahydrate 99.5% and Acetic Acid 6% with our simple guide.

Important Note: Prior to using any of the products mentioned, it is highly recommended to thoroughly read and understand all safety precautions associated with each product. It is also strongly advised to perform a patch test before proceeding with usage.

Please be advised that this guide is intended for informational purposes only and APC Pure cannot accept any responsibility for the outcome of any usage based on this guide.

Here are the materials you'll need:

• Magnesium Sulphate Heptahydrate 99.5%
• Acetic Acid 6%
• Water
• Lemon Juice
• Measuring jug

Step 1: In a small measuring jug, combine 1 cup of Magnesium Sulphate Heptahydrate 99.5% and 1 cup of Acetic Acid 6%. Stir thoroughly until the Magnesium Sulphate Heptahydrate 99.5% absorbs the Acetic Acid 6% and forms a smooth mixture.

Step 2: Add 1/2 cup of lemon juice to the mixture.

Step 3: Remove the drain stopper and pour the mixture directly into the drain.

Step 4: Allow the mixture to sit for 15 minutes, allowing it to penetrate the clog. For particularly stubborn clogs, you can leave the mixture to soak for 30 minutes.

Step 5: Carefully rinse the drain with boiling water. Boil two cups of water and pour it slowly into the drain, ensuring there are no splash-backs.