Clifton NE3DT Pro Digital Water Bath Unstirred - 8 Litre

Excl. VAT Incl. VAT

Code: NE3-8DT

Revert

Variation ID		Product Code	Pack Size	List Price	Qty
17607	photo_camera	NE3-8DT	8 Litre x 1 Pack NE3-8DT	£768.97

Revert

Pack: 8 Litre x 1 Pack

£768.97

General
Specification

Temperature Range : Ambient 5°C - 100°C

The NE3DT pro digital water baths feature precision temperature control with an option to enable a run back or delay start timer, the latter useful for pre-conditioning water temperature before use. Controls feature auto alarm setting, illuminated on/off switch, heater and over temperature indications.

Supplied with clear hinged lid,* convenient to use, all condensate runs back into the bath in either open or closed positions. Also features a durable gated drain tap** designed to quickly empty the water bath, painted antibacterial surfaces and touch flush fitting controls, with illuminated LED display for temperature and time values.

*except NE3-56DT

**except NE3-4DT

Features and Benefits

The NE3DT Series comes with a 3 year warranty as standard.

Before leaving the factory, every water bath is identified with a unique serial number and undergoes factory calibration against a known traceable value. Each unit is electrically tested for safety during final inspection, with a test certificate enclosed in the instruction book.

The shelf within the stainless steel tank provides stable support for flasks, bottles and racks and can be removed for cleaning. Its low-height design maximises the available working height.

Painted surfaces feature anti-bacterial technology that inhibits bacterial growth, helping to support hygiene requirements in clinical and laboratory environments.

A broad range of accessories is available to suit different applications.

Safety Features

• Thermal cut out fitted in the heater.

• IP rated clear booted on/off power switch.

• Bath fitted with non-slip rubber feet.

• Over temperature alarm automatically set 4˚C above set temperature with visual indicator and heating is turned off protecting samples from overheating.

Controls

Featuring bold LED display of measured temperatures in real-time, increments of 0.1°C, using precision PID temperature control. Settings retained even after turning the unit off. Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating and over temperature alarm. Features auto setting over temperature alarm protecting samples at set temperature. Every unit undergoes a factory calibration at two temperatures for validation.

Energy Consumption

0.33kWh @ 37°C
0.34kWh @ 60°C – Lid fitted
(Based on NE3-8DT)
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and consumption measured at set point. Please remember that the energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading.

Heating and Sensors

Heaters and temperature sensor are concealed under the tank providing an easy to clean working area. The heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity.

Heating Information

Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres – see accessories. Covering the bath with a lid reduces energy consumption and running costs. This range of baths will operate at 100°C however are not designed for continuous boiling, the NE1B boiling bath range is recommended.

Shipped direct by Nickel-Electro

All Nickel-Electro products are securely packed for safe delivery. Orders are fulfilled from their Weston Super Mare facility, ensuring fast and reliable UK delivery.

Product Code	NE3-4DT	NE3-8DT	NE3-14DT	NE3-28DT	NE3-56DT
Chamber Capacity	4 Litres	8 Litres	14 Litres	28 Litres	56 Litres
Temperature Range	Ambient + 5°C - 100°C
Temperature Control	PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature Alarm	Over temperature alarm is automatically set 4˚C above set point
Temperature Control and run back timer	Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature Control and delay start timer timer	Heating commences at a set time in future Within 24 hours, useful for pre-conditioning water bath ready for use.
Sensitivity	±0.2°C
Uniformity	±0.1°C
Heater Power (220-240V)	400W	800W	1000W	1500W	2500W
Voltage	120V or 230V models available 50-60Hz
Drain Tap Fitted	No	Yes
Dimensions
External (mm)	332w x 185d x 290h	332w x 270d x 290h	361w x 332d x 290h	538w x 332d x 290h	660w x 540d x 290h
Internal (mm)	300w x 150d x 150h	300w x 240d x 150h	325w x 300d x 150h	500w x 300d x 200h	620w x 500d x 200h
Water Level Max. (mm)	130			180
Max Depth Above False Base (mm)	115			165
Water Level Min. (mm)	55