Clifton NE4-D Digital Water Bath Stirred - 28 Litre

Excl. VAT Incl. VAT

Code: NE4-28D

Revert

Variation ID		Product Code	Pack Size	List Price	Qty
17628	photo_camera	NE4-28D	28 Litre x 1 Pack NE4-28D	£1078.92

Revert

Pack: 28 Litre x 1 Pack

£1078.92

General
Specification

Temperature Range : Ambient 5°C - 99°C

Clifton stirred water baths feature a digital PID temperature controller and are designed for immersion of flasks, bottles and racks in an accurate temperature environment throughout the water bath.

Clifton stirred baths are constructed using durable stainless steel, painted surfaces are powder coated with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean also have an anti-bacterial finish. Immersed components are corrosion resistant.

The stainless steel tank is housed in a sturdy outer case and is supplied complete with a stainless steel shelf which provides even water circulation and temperature stability.

Features and Benefits

The NE4-D Series comes with a 3 year warranty as standard. Nickel-Electro also offer free advice and support.

Stirred Clifton water baths feature a digital PID temperature controller and are designed for immersion of flasks, bottles and racks in an accurate temperature environment throughout the water bath.

Before leaving the factory, every water bath is identified with a unique serial number and undergoes factory calibration against a known traceable value. Each unit is electrically tested for safety during final inspection, with a test certificate enclosed in the instruction book.

Efficient water movement and temperature control provides accurate temperature stability throughout the water bath.

Painted surfaces feature anti-bacterial technology that inhibits bacterial growth, helping to support hygiene requirements in clinical and laboratory environments.

A broad range of accessories is available to suit different applications.

Safety Features

• The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition, the indicator illuminates and actual bath temperature is shown. If bath is over temperature, both heating and stirring are switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown.

• Features a low liquid level float switch, which ensures heating is switched off if the liquid falls below the recommended level – display will show “FiLL”. Heating is switched off but stirring continues. To reset, carefully top up the liquid to the recommended level.

Controls

Featuring a bold LED display of measured temperatures in real-time and in increments of ±0.1°C, using a precision PID temperature controller. Setting for water temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 (hh:mm) to 99:59 (hh:mm) with “end” message on completion of the timed period. Time and temperature settings are retained in the memory, even after the unit has been turned off. Every unit undergoes a factory calibration at 37°C and 85°C for validation.

Energy Consumption

0.5kWh @ 37°C
(Based on NE4-8D)
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading.

Heating/Cooling Information

For cooling a water bath use an accessory immersion cooler DC1-300 refer to Accessories. Where bath temperatures are below ambient we recommend a mix of glycol and water. We also recommend a lid or layer of spheres for insulation. The water bath should be used in ambient temperature 20°C. For water temperatures above 60°C we recommend that an accessory lid or layer of spheres are used for optimum performance. This will reduce evaporation and a lid will keep the samples and water free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.

Shipped direct by Nickel-Electro

All Nickel-Electro products are securely packed for safe delivery. Orders are fulfilled from their Weston Super Mare facility, ensuring fast and reliable UK delivery.

Product Code	NE4-8D	NE4-14D	NE4-22D	NE4-28D	NE4-38D	NE4-56D
Chamber Capacity	8 Litres	14 Litres	22 Litres	28 Litres	38 Litres	56 Litres
Temperature Range	Ambient + 5°C - 99°C
Temperature Control	PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature Alarm	Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point
Sensitivity	±0.05°C					±0.2°C
Uniformity	±0.01°C					±0.02°C
Timer	Variable, 00:01 to 99:59 hh:mm. Activates at set temperature. End timed period, audible buzzer and "end" message.
Heater Power (220-240V)	1250W					2000W
Voltage	120V or 230V models available 50-60Hz					230V / 50-60Hz
Drain Tap Fitted	No			Yes
Dimensions
External (mm)	271w x 332d x 170h	361w x 332d x 170h	537w x 322d x 170h	537w x 332d x 290h	715w x 330d x 235h	660w x 540d x 290h
Internal (mm)	129w x 300d x 150h	219w x 298d x 150h	395w x 298d x 150h	395w x 298d x 200h	570w x 295d x 200h	490w x 500d x 200h
Water Level Max. (mm)	130			180	195	180
Max Depth Above False Base (mm)	95			145	155	145