Free Chlorine Checker HC

Free Chlorine Checker HC

Ideal for swimming pools, spas and aquariums

Chlorine is the most common water disinfectant and by monitoring chlorine regularly and accurately, serious health and safety risks can be avoided.

The contoured style of the HI-701 Free Chlorine Checker is designed to fit in the palm of your hand. The large LCD is easy to read and the auto shut-off feature ensures the battery life will not be drained if you forget to turn it off.

Can also be used to determine chlorine levels in fish tanks for optimum fish and plant health. Use alongside recommended dechlorinators.

Checker HC is supplied with reagents for 6 tests. Use code HI-701-25 (25 tests) for future purchases.

Ideal for

• Swimming pools and spas
• Fruit, vegetable and salad washing
• Disinfection
• Aquaculture

Main Benefits

• Testing is quick and easy
• High precision results - more accurate than chemical test kits
• Auto shut-off feature means the Checker cannot be left on by mistake
• Fully portable, fitting easily into both palm and pocket

Supplied with

• 2 sample cuvettes
• Cuvette cap
• Starter pack of reagents (re-ordering information - HI-701-25
• 1 x 1.5 AAA battery
• Instructions

Range	0.00 to 2.50 ppm (mg/L)
Resolution	0.01 ppm (mg/L)
Precision	3% of reading ±0.03 ppm (mg/L) @ 25°C
Light Source	LED @ 525 nm
Light Detector	Silicon photocell
Environment	0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type	(1) 1.5V AAA
Auto-off	After 2 minutes of non-use and after read
Dimensions	81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”)
Weight	64 g (2.25 oz.)
Method	Adaptation of USEPA method 330.5. The reaction between free chlorine and the DPD reagent will cause a pint tint in the sample.

PLEASE NOTE:

In some cases, samples may contain other parameters which may interfere with results

Interference may be caused by:

Bromine, Iodine, Ozone, Oxidized forms of Chromium and Manganese. In case of water with hardness greater than 500 mg/L CaCO3, shake the sample for approximately 2 minutes after adding the powder reagent. If the water used for this procedure has an alkalinity value greater than 250 mg/L CaCO3 or acidity value greater than 150 mg/L CaCO3, the colour of the sample may develop only partially, or may rapidly fade. To resolve this, neutralise the sample with diluted HCl or NaOH.