Refillable Combination pH Electrode with BNC + Pin Connector

HI-1131P General Purpose pH Electrode, BNC Connector + Pin

The HI-1131P is a glass bodied refillable single junction combination pH electrode suitable for general laboratory use.

Supplied fitted with

• BNC + pin connector
• 1m cable

Tips for the most accurate measurements

Keep electrode hydrated

Ideally, pH electrodes should be kept in a storage solution when not in use. Placing the electrode in a small glass filled with storage solution is suitable. An option for pocket meters is to place a small piece of sponge into the meter’s cap and pour storage solution into the cap to wet the sponge. Pouring off any excess solution beforehand, the cap can then be placed on the meter.

Clean electrodes before use

Clean the junction of your electrodes once a day or at least once a week to prevent junction clogging and to maintain accuracy. Immerse the electrode in the proper cleaning solution for at least 15 to 20 minutes. 

Replace electrode once a year

If your electrode takes too long to stabilise a reading, or readings fluctuate wildly, it is most likely time to replace the electrode. The typical life span of any pH electrode is from 6 months to 1.5 years.